Burdick Oxy 100 Pulse Oximeter
Features
- Simple operation
- Audible and visible pulse rates, strength indicators
- A small and highly-portable digital oximeter
- Easy-to-read LED digital display
- Supports all oximeter sensors - neonate to adult
- Warranty: 2-Year Parts and Labor
|
DIMENSIONS |
|
Dimensions: |
1.43" x 2.75" x 6.60" (36.32 mm x 69.85 mm x 167.64 mm) |
|
WEIGHT |
|
Weight: |
13 oz. (369 g) (with batteries) |
|
DISPLAY |
|
SpO2: |
LED numeric, 0.43" (10.9 mm) high |
Pulse rate: |
LED numeric, 0.43" (10.9 mm) high |
Pulse strength: |
Logarithmically-scaled 8-segment LED bar graph |
Low battery indicator: |
1-segment LED |
|
INPUT/OUTPUT |
|
Input/Output: |
RS232C (for trend data only) |
|
DATA STORAGE |
|
Data Storage: |
14 hours at 30 sec. intervals |
|
KEYS |
|
Keys: |
On/off; clear ID; speaker silence |
|
SENSORS |
|
Red: |
660 nm, 2 mW (typical) |
Infrared: |
905 nm, 2 mW to 2.4 mW (typical) |
|
POWER REQUIREMENTS |
|
Battery operation: |
4 alkaline AA-cell batteries (IEC type LR6) |
Duration: |
24 hours continuous operation |
Auto shutoff: |
After 2 minutes of non-use |
|
ACQUISITION SpO2 |
|
Range: |
0% to 99% functional SpO2 in 1% increments |
Accuracy: |
±2 digits at 70% to 99%; less than 70% is unspecified |
Averaging: |
8 pulse beats |
Display update rate: |
1 Hz (SpO2); 60 Hz (pulse strength) |
Calibration: |
Factory calibrated. No in-service calibration required. |
|
ACQUISITION PULSE RATE |
|
Range: |
30 bpm to 254 bpm in1 bpm increments |
Accuracy: |
±2% or 2 bpm, whichever is greater |
Averaging: |
8 seconds |
Display update rate: |
1 Hz |
|
ENVIRONMENTAL SPECS |
|
Operating Temperature: |
32°F to 131°F (0°C to 55°C) |
Operating relative |
15% to 95% non-condensing |
Storage Temperature: |
-40°F to 167°F (-40°C to 75°C) |
Storage relative |
10% to 95% non-condensing |
|
CONFORMS TO STANDARDS |
|
Conforms To Standards: |
EN60601-1:1990; CSA c22.2 No. 125; UL 544 |
|
MECHANICAL DURABILITY |
|
Vibration testing: |
IEC 68-2-34, IEC 68-2-6, and MIL-STD-810E, Method 514.4 |
Shock testing: |
IEC 68-2-27 |
Drop testing: |
IEC 601-1, Section 21.5 |
|
SAFETY |
|
Protection against |
Internally powered, Type BF |
Protection against |
IPX1, drip-proof |
Mode of operation: |
Continuous |
Degree of mobility: |
Portable |
|
WARRANTY |
|
Warranty: |
2 years parts and labor |
|
ORDERING INFORMATION |
||||
|
92521-1A |
Burdick OXY 100 includes finger sensor, |
|||
|
92521-1 |
Same as 92521-1A without sensor |
|||
|
010-1353-00 |
Protective rubber carrying case with strap |
|||
|
900-0035-00 |
UpTime™ extended warranty and service contract |
|||
|
047173 |
Reusable finger sensor, adult |
|||
|
047174 |
Reusable ear sensor, adult |
|||
|
047171 |
Reusable foot sensor, neonate |
|||
|
047170 |
Reusable toe sensor, infant |
|||
|
047172 |
Reusable universal Y sensor |
|||
|
047176 |
Disposable finger/toe sensor, adult (10/box) |
|||
|
047175 |
Disposable finger/toe sensor, pediatric (10/box) |
|||
|
047177 |
Disposable hand/foot sensor, neonate (10/box) |
|||
|
047178 |
Disposable finger/toe sensor, infant (10/box) |
|||
Disposable Adult Finger/Toe Sensor
Noninvasively measure oxygen saturation, pulse rate, and plethysmographic pulse waves.
Disposable Infant Finger/Toe Sensor
Non-invasively measure oxygen saturation, pulse rate and plethysmographic pulse waves.
Disposable Neonate Hand/Foot Sensor
Noninvasively measure oxygen saturation, pulse rate and plethysmographic pulse waves.
Disposable Pediatric Finger/Toe Sensor
Non-invasively measure oxygen saturation, pulse rate and plethysmographic pulse waves.
Protective Rubber Carry Case with strap
Protective Rubber Carry Case with strap for the Oxy 100 Pulse Oximeter
Reusable Adult Finger Sensor
Noninvasively measure oxygen saturation, pulse rate, and plethysmographic pulse waves.
Reusable Ear Sensor for Adults
Noninvasively measure oxygen saturation (SpO2), pulse rate and plethysmographic pulse waves.
Reusable Infant Wrap Sensor
Noninvasively measure oxygen saturation, pulse rate and plethysmographic pulse waves.
Reusable Neonate Wrap Sensor
Noninvasively measure oxygen saturation (SpO2), pulse rate and plethysmographic pulse waves.
Reusable Universal "Y" Oxygen Sensor
Noninvasively measure oxygen saturation, pulse rate and plethysmographic pulse waves.
